Our manufacturing facilities
Star Precision runs 115,000 sq ft across two ultra-clean facilities in Northwest Houston, home to some of the most technologically advanced metal fabrication equipment in the industry, plus CNC machining and electronics assembly under the same roofs.
115,000 sq ft built for turnkey work
Star Precision, a contract manufacturing leader since 1992, offers tailored contract manufacturing services. We specialize in high-quality components, serving industries like medical, oil and gas, solar and more. Located in Northwest Houston, our two ultra-clean facilities (115,000 sq ft) offer state-of-the-art total manufacturing services.
Our headquarters at 5410 Brystone Drive houses the metal fabrication division, which specializes in precision metal fabrication, from punching and laser cutting to welding complete enclosures and other fabricated parts. We handle materials ranging from light and medium or heavy gauge aluminum to copper, steel, stainless steel and brass, in various shapes, sizes and finishes.
Our second facility at 11236 Brittmoore Park Drive offers electronics, machining and electro-mechanical services. The electronics department specializes in high-quality PCB assembly, the machine shop excels in precision milling and turning, and our electro-mechanical assembly team provides everything from simple sub-assemblies to complex final product assembly.
See what we make here
Two facilities, one ZIP code
Both plants sit minutes apart in Northwest Houston, Texas 77041.
Houston, TX 77041
50,000 sq ft
View on Google
Houston, TX 77041
Building 1: 54,000 sq ft · Building 2: 9,600 sq ft
View on Google
Advanced manufacturing equipment
A cross section of the machines that let us fabricate, machine, assemble and inspect in house.
Automated flat laser
24/7 automated laser cutting with load and unload, sheet up to 60 x 120 in, mild steel up to .750 in.
NC punching and forming
NC punching plus 220-ton press brakes with a 14 ft bed, for accurate holes, bends and rolled shapes.
Fiber-optic tube laser
Cuts round, square and structural tube with bevels, raw length up to 30 ft and self-fixturing fit-up.
5-axis milling
Machines complex curves and surfaces that are impossible on a 3-axis mill, in a wide range of materials.
Multi-axis turning
Turning and milling on one machine for lower setup and cycle time and less scrap on turned parts.
Wire EDM
Cuts precise, complex profiles with minimal waste, ideal for tight tolerances and hardened materials.
SMT and PCBA line
Surface mount and through-hole PCB assembly with SPI, AOI and X-ray inspection and conformal coating.
CMM inspection
Coordinate measuring machines and laser inspection verify dimensions and generate first article data.
A look around the floor
Clean, organized bays for cutting, machining and electronics.
Explore our manufacturing case studies
See how manufacturers and engineers rely on Star Precision to take complex projects from concept to finished build, including laboratory instruments, architectural steel and solar traffic systems.
Fraction Collector
A complete laboratory instrument built with every service under our roof, from fabrication and machining to electronics, firmware and final calibration.
Explore all projects
El Paso Airport Art
An 11-gauge steel art canopy laser cut, welded and finished in Sky White, crowned with colorful dichroic acrylic panels.
Explore all projects
Traffic Control Solar Signage
Turnkey solar crosswalk beacons for Carmanah Technologies: sheet metal, full electro-mechanical assembly, programming and testing.
Explore all projects
Corn Tortilla Machine
Fiber laser cut parts at over 4,000 in/min, precision turned rollers, assembled and tested for Tortilla Masters.
Explore all projects
Utility Relay Panel
Custom sheet metal panels reverse-engineered, welded, powder coated and delivered turnkey on pallets for Panelmatic.
Explore all projectsExplore all projects
See every complete build we've delivered, start to finish.
Frequently asked questions
What does Star Precision manufacture?
We are a turnkey contract manufacturer. That means metal fabrication and tube laser cutting, precision CNC machining and Wire EDM, and full electronics manufacturing (PCB assembly, electro-mechanical box build, and cable and wire harness assembly), plus design-for-manufacturability and manufacturing support, all in-house since 1992.
What makes Star Precision a one-stop shop?
Because fabrication, machining and electronics assembly all happen under one roof, we can take a project from raw material and bare board through to a finished, tested and packaged product without handing it off between outside vendors. You get one supplier, one point of contact and one team accountable for the whole build.
Where are you located?
Northwest Houston, Texas, in two facilities. Our Brystone Drive plant (5410 Brystone Drive) houses metal fabrication, and Brittmoore Park Drive (11236 Brittmoore Park Drive) runs machining, electronics and assembly. Both are in Houston, TX 77041.
Are you ISO certified?
Yes. Star Precision is ISO 9001 certified. Our electronics processes are IPC-A-610, IPC/WHMA-A-620 and J-STD-001 certified, with an ESD-safe department, and we use CMM and laser quality inspection for dimensional accuracy.
What materials do you work with?
For fabrication and machining we work in mild steel, stainless steel, aluminum, copper and brass, plus a wide range of electronic components for PCB and electro-mechanical assembly. If you are unsure what suits your part, our team can advise during a design review.
What are your fabrication and machining capabilities?
Sheet metal laser cutting up to 60 x 120 in and up to 1.00 in steel, NC punching and forming on a 220-ton, 14 ft brake, and fiber tube laser cutting of tube up to 30 ft raw and parts up to 236 in. On the machining side we run 5-axis milling, multi-axis turning and Wire EDM, verified by automated CMM inspection.
What electronics assembly do you offer?
SMT, through-hole and mixed-technology PCB assembly, single and double sided, managed by MES software and verified with SPI, AOI, X-ray and functional testing, with conformal coating and potting available. We also build cable and wire harness assemblies and integrate everything into complete electro-mechanical box builds.
Do you handle both prototypes and production?
Yes. We support the full lifecycle, from design-for-manufacturability and prototypes through first article inspection to low and high volume production, so the same partner that helps refine your design can also scale it.
Which industries do you serve?
We build for oil, gas and energy, aerospace and space, defense and military, medical and scientific instruments, electronics, data and telecom, industrial and OEM equipment, architectural metals, food equipment, solar and alternative energy, robotics, automotive, consumer electronics, security and surveillance, agriculture, HVAC and building automation, retail and point of sale, and marine, among others.
How do I request a quote?
Use the Request a Quote page to upload your drawings or CAD files, call us on (713) 983-8883 or email sales@star-precision.com. We review your requirements and reply with a fast, no-obligation quote.
How large are your facilities?
Our two ultra-clean plants total 115,000 sq ft of manufacturing space.
What equipment do you have on site?
Automated flat and tube lasers, NC punching, 220-ton press brakes, 5-axis milling, multi-axis turning, Wire EDM, SMT and through-hole PCB assembly lines, and CMM inspection.
Do you keep fabrication, machining and electronics in house?
Yes. Metal fabrication runs at our Brystone Drive plant, and machining, assembly and PCBA run at Brittmoore Park Drive, minutes apart. That is what makes turnkey, one-stop manufacturing possible.
Can I visit or tour the facility?
We welcome qualified customers and partners. Call (713) 983-8883 or email sales@star-precision.com to arrange a visit.